A Jeep Renegade not starting could be due to a dead battery, a faulty starter motor, ignition issues, or a fuel system problem. To pinpoint the exact cause, it’s advisable to have a professional mechanic diagnose and repair the issue promptly.

If your Jeep Renegade doesn’t start, there are several potential causes. First, check if the battery is dead by turning on the headlights. If they don’t come on, the battery may be the problem.

Another possibility is that the starter or alternator is faulty. If you hear a clicking noise when you turn the key, this may indicate that the starter needs to be replaced. Alternator problems can also cause starting issues, so this may be the issue if your engine is cranking slowly or not at all.

In some cases, a bad fuel pump can prevent your Jeep from starting. If you suspect this is the problem, check to see if you’re getting power to the pump by testing for voltage at the pump connector. Finally, it’s possible that your Jeep’s computer has failed and needs to be reset.

This can usually be done by disconnecting and reconnecting the battery cables.

What are the Most Common Problems With Jeep Renegade

Credit: www.reddit.com

What are the Most Common Problems With Jeep Renegade?

If you’re considering purchasing a Jeep Renegade, it’s important to be aware of the most common problems that owners have reported. Here are some of the top issues:

1. Battery Troubles

A weak or dead battery is one of the most common reasons for a Jeep Renegade not starting. The battery is the heart of your vehicle’s electrical system, and if it’s not delivering enough power to start the engine, you’ll be left stranded.

2. Transmission problems

Many Jeep Renegade owners have complained about transmission issues, including sudden shifting, hard shifting, and gears slipping. These problems can be expensive to fix and may require a complete transmission replacement.

3. Engine stalling

Some Jeep Renegades have experienced engine stalling, especially when idling or at low speeds. This can be a dangerous problem if it happens while you’re driving, so it’s something to be aware of.

4. Electrical issues

A number of electrical problems have been reported by Jeep Renegade owners, including faulty headlights, taillights and turn signals. These issues can be frustrating and dangerous, so fix them immediately.

5. Suspension problems

Another common issue with the Jeep Renegade is suspension problems. Owners have complained about rough rides, noisy shocks and swaying while driving. These issues can be dangerous and costly to fix, so get them checked out by a professional if you’re experiencing them.

6. Faulty Starter Motor

The starter motor is responsible for turning the engine over when you turn the key. If it’s malfunctioning, your Renegade won’t start.

7. Fuel System Issues

Your Renegade’s engine needs fuel to operate, and any problems with the fuel system can prevent it from starting. This can include issues with the fuel pump, fuel filter, or even an empty gas tank.

8. Ignition Problems

If the ignition switch or ignition coil is faulty, it can lead to a no-start condition in your Jeep Renegade.

Also Read: Why My Jeep Grand Cherokee Won’T Start

Troubleshooting and Solutions

1. Checking the Battery

To rule out battery issues, start by checking the battery voltage with a multimeter. If it’s below 12.4 volts, it may need a recharge or replacement. Ensure the battery terminals are clean and tightly connected.

2. Testing the Starter Motor

If you hear a clicking sound when you turn the key, it could indicate a faulty starter motor. Have it tested and replaced if necessary.

3. Fuel System Inspection

Check the fuel gauge to ensure you have an adequate amount of fuel. If it’s not the issue, inspect the fuel pump and filter for any problems.

4. Diagnosing Ignition Problems

If you suspect ignition problems, consult a mechanic who can perform diagnostic tests to identify and fix the issue.

Also Read: Why Won’T My Jeep Compass Start in the Cold

Preventative Measures

1. Regular Maintenance

To avoid future starting issues, follow the manufacturer’s recommended maintenance schedule, including battery checks and replacements.

2. Keep an Eye on Warning Lights

Pay attention to the warning lights on your dashboard. They can provide early indications of potential problems, allowing you to address them before your Renegade refuses to start.

Also Read: Why Won’T My Jeep Cherokee Start

Jeep Renegade Won’T Start Lights Flashing

If you own a Jeep Renegade, you may have experienced an issue where the vehicle won’t start and the lights start flashing. This can be a frustrating problem, but there are some things you can try to fix it.

First, check to see if your battery is fully charged. If not, try charging it or replacing it with a new one.

Next, check all the fuses in your vehicle to see if they are blown. If so, replace them with new ones.

Finally, if your Jeep still doesn’t start, there may be an issue with the starter itself. You’ll need to take it to a mechanic or dealership for further diagnosis and repair.

Jeep Renegade Won’T Start Not Battery

If your Jeep Renegade won’t start, it could be due to a number of issues. Here are some potential causes:

1. Dead Battery – If your battery is dead, your Jeep Renegade won’t start. Try jump-starting the vehicle to see if that’s the issue.

2. Faulty Starter – A faulty starter can prevent your Jeep Renegade from starting. Have the starter checked by a mechanic to see if it needs to be replaced.

3. Loose Wiring – Loose wiring can cause all sorts of electrical issues, including preventing your Jeep Renegade from starting. Check all the wiring under the hood to make sure everything is secure and tight.

4. Fuel Issues – If there’s an issue with the fuel system, it could prevent your Jeep Renegade from starting. Check things like the fuel pump and filter to ensure they’re working properly.

Jeep Renegade Won'T Start Clicking Noise

Jeep Renegade Won’T Start Clicking Noise

If you’re having trouble starting your Jeep Renegade, it could be due to a clicking noise from the engine. This can be caused by a number of different things, so it’s important to diagnose the problem correctly to fix it.

One possible cause of the clicking noise is a faulty starter motor. If this is the case, you’ll need to replace the starter motor to get your Jeep Renegade running again.

Another possibility is that there’s something wrong with the battery terminals. Ensure they’re clean and corrosion-free before trying to start the engine again.

If you’re still having trouble starting your Jeep Renegade after checking these things, then there’s likely an issue with the ignition system. This is a more complex repair and will require professional help to fix properly.

How to Manually Start Jeep Renegade

Assuming you would like a blog post about how to start a Jeep Renegade: The Jeep Renegade is a compact SUV that was first introduced in 2015. It’s available in four-wheel drive or front-wheel drive and has a variety of engines to choose from.

The Renegade is a great option if you’re looking for an off-road capable vehicle that’s still relatively small and easy to maneuver. Here’s a step-by-step guide on how to start one manually.

1. Open the hood and locate the battery. It should be on the driver’s side of the engine bay.

2. Make sure the engine is turned off before proceeding. Then, use a wrench or pliers to remove the negative terminal (black) from the battery.

3. Take out the key fob from your pocket and press the “Start” button three times without touching the brake pedal or accelerator pedal. This will put the Jeep into accessory mode, allowing you to start the engine without holding down any buttons.

4. Finally, turn the key clockwise until it reaches resistance, then stop abruptly. Doing this should start up your Jeep Renegade!

How Do You Start a Jeep Renegade With a Dead Key?

If your Jeep Renegade key won’t start the engine, it may be because the battery in the key fob is dead. If this is the case, you can still start your Jeep by using the emergency key that comes with the vehicle. To do this, insert the emergency key into the slot next to the regular ignition key and turn it clockwise.

Why is My Car Not Cranking at All?

If your car is not cranking at all, there are a few potential reasons why. The first thing you should check is the battery. If the battery is dead, the car will not crank.

You can test the battery with a voltmeter to see if it receives enough power. If it is, the starter motor is the next thing to check. If the starter motor is damaged or malfunctioning, it cannot turn over the engine and start the car.

Finally, if neither of those are the problem, it could be an issue with the ignition switch. If the ignition switch is not working properly, it will not send a signal to activate the starter motor.

What is the Clicking Sound in My Jeep Renegade?

The clicking sound in your Jeep Renegade is most likely from the engine. A few things can cause this common problem with Jeeps:

The first thing you should check is the oil level. If the oil level is low, it could be causing the engine to make a clicking noise.

Another possibility is that the engine’s timing belt has slipped. This can happen if the timing belt isn’t properly tensioned or if it’s worn out. If this is the case, you’ll need to have the belt replaced as soon as possible.

Finally, there could be an issue with the lifters or rockers in the engine. These components can become worn out and start to make noise over time. If this might be the problem, take your Jeep to a mechanic for a diagnosis.

Wrapping Up

Facing a non-starting Jeep Renegade can be frustrating, but with the information provided in this guide, you’re better equipped to diagnose and resolve the issue. Whether it’s a dead battery, starter motor problem, fuel delivery issue, or something else, taking appropriate action will get your Jeep Renegade back on the road where it belongs.

Don’t forget to perform regular maintenance to prevent starting problems in the future. Armed with knowledge and expert advice, you can confidently tackle the question, “Why is My Jeep Renegade Not Starting?”


How often should I check my Jeep Renegade’s battery?

It’s a good practice to check your battery at least once every six months to ensure it’s in good condition.

What should I do if my Renegade’s fuel gauge shows an empty tank but I’ve just refueled?

This might be a problem with the fuel gauge sensor. Consult a mechanic for a proper diagnosis and repair.

Can I jumpstart my Jeep Renegade if the battery is dead?

Yes, you can jumpstart it using jumper cables and another vehicle with a charged battery.

Why is my Jeep Renegade making a clicking sound when I try to start it?

The clicking sound could indicate a problem with the starter motor or a weak battery. Have them both checked.

5/5 - (1 vote)

Leave a Reply