To replace the key fob battery in your Jeep Compass, you can follow the steps below:

  • Locate the battery cover on the back of the key fob
  • Remove the cover to access the battery
  • Use a small flathead screwdriver or similar tool to pry out the old battery
  • Insert the new CR2032 battery into the key fob, making sure that the positive (+) side is facing up
  • Replace the battery cover and screw it in place (if applicable)
How to Replace Key Fob Battery Jeep Compass


Jeep Compass Key Fob Battery Low

If you own a Jeep Compass, you may have noticed that the key fob battery is starting to die. This can be a real pain, especially if you’re in a hurry and need to get into your car. Here are some tips on how to change the battery in your Jeep Compass key fob:

1. Start by removing the back cover of the key fob. There are usually two small screws or plastic snaps that hold it in place.

2. Once the back cover is off, you should see the battery inside. It will be held in place by a small metal clip or piece of tape.

3. Use a small flathead screwdriver or knife to gently pry the old battery out of its housing. Be careful not to damage any of the surrounding electronics!

4. Insert the new battery into the housing and replace the back cover. Make sure it’s snug and secure before putting your key fob back together again.

Jeep Compass Key Fob Replacement

If you need to replace your Jeep Compass key fob, there are a few things you need to know.

First, you’ll need to purchase a new key fob. You can find these online or at your local Jeep dealership.

Once you have your new key fob, you’ll need to program it to work with your Jeep. This can be done by following the instructions in your owner’s manual or by taking it to a Jeep dealer for programming.

Once you have your new key fob, you’ll want to keep it safe and secure. Here are a few tips for doing so:

  • Keep it away from water and other liquids
  • Don’t leave it in direct sunlight for extended periods.
  • Avoid storing it in extreme temperatures (either hot or cold).

By following these simple tips, you can help ensure that your new Jeep Compass key fob lasts for many years to come!

Jeep Compass Key Fob Not Detected

If you’ve ever had the issue of your Jeep Compass key fob not being detected, you know how frustrating it can be. Here are some tips on what to do if you find yourself in this situation.

First, check the batteries in your key fob.

If they are low, replace them and see if that solves the problem.

If not, there could be an issue with the antenna or receiver in your vehicle. Try taking your key fob to a different Jeep dealership and have them test it on one of their vehicles.

This will help rule out whether the problem is with your specific vehicle. If all else fails, you may need to get a new key fob from Jeep. They should be able to program it to work with your vehicle so that you don’t have any more issues.

Jeep Compass Key Fob Tricks

If you own a Jeep Compass, you probably know that there are some great key fob tricks that can make your life easier. Here are just a few of the things that you can do with your Compass key fob:

1. Lock and unlock your doors without taking the key out of your pocket. Just press the button on the top of the key fob once to lock all the doors, or twice to unlock them.

2. If you need to open the trunk, just press and hold the button on the top of the key fob for about three seconds. The trunk will automatically pop open for you.

3. Activate or deactivate the panic alarm by pressing and holding the button on the side of the key fob for about three seconds. This can come in handy if you ever find yourself in an unsafe situation.

4. Find your car in a crowded parking lot by pressing and holding the button on the side of the key fob for about six seconds.

The lights on your Jeep will flash so you can easily find it among all the other cars.

Jeep Compass Key Fob Cover

If you own a Jeep Compass, then you know that the key fob is an essential part of the vehicle. Not only does it allow you to start the car, but it also provides access to the trunk and other functions. Given its importance, it’s no surprise that many people choose to protect their key fob with a cover.

There are a variety of different covers available for the Jeep Compass key fob, ranging in style from simple and functional to stylish and trendy. Whether you’re looking for protection from the elements or just want to add some personalization to your ride, there’s a key fob cover out there that’s perfect for you. Here are just a few of the different types of covers available:

Plastic Covers

These are some of the most basic and inexpensive covers available. They provide basic protection from scratches and wear and tear, but won’t do much to protect your key fob from the elements.

Silicone Covers

Silicone covers are a step up from plastic in terms of both price and quality. They offer better protection against scratches and wear and tear, as well as being more resistant to heat and cold than plastic covers.

In addition, silicone covers can often be found in fun colors and designs, which makes them more stylish than their plainer plastic counterparts.

Leather Covers

Leather key fob covers offer the best protection against damage while also providing a touch of luxury. Of course, they come with a higher price tag than either plastic or silicone covers. But if you’re looking for something special to show off your Jeep Compass pride, then a leather cover is worth considering.

What Kind of Battery Does a Jeep Compass Key Fob Take?

Most key fobs use a CR2032 battery. This type of battery is also known as a coin cell battery. Coin cell batteries are typically used in small electronic devices, like key fobs, calculators, and watches.

These batteries are very thin and have a diameter of about 20 mm. They are also relatively inexpensive and easy to find.

How Do You Change the Battery in a 2017 Jeep Compass Key Fob?

Assuming you are referring to the key fob for a 2017 Jeep Compass, the process is as follows:

1. Open the key fob by unscrewing the Phillips head screw in the back.

2. Carefully pull apart the two halves of the key fob. You may need to use a small flathead screwdriver to help pry it open.

3. Once opened, locate the battery which is housed under a small black tab. Gently push up on this tab and then slide the old battery out.

4. Insert a new CR2032 3V coin battery into the compartment positive side up (the + sign should be facing you). Be sure that it snaps into place under the black tab before proceeding.

How Do You Open a Jeep Key Fob to Replace the Battery?

If your Jeep key fob has stopped working, it may be time to replace the battery. Here’s a quick guide on how to do just that:

1. Start by removing the key fob from your key ring. Most Jeep key fobs have a small release button on the side that allows you to pop off the top half of the fob.

2. Once the top half is off, you should see the battery nestled inside. Use a small flathead screwdriver or butter knife to carefully pry out the old battery.

3. Take note of which way the battery is oriented before installing the new one – there’s usually a + and – sign printed on one side of the battery compartment to help guide you. Install the new battery in the same orientation as the old one was in and then snap the top half of the key fob back into place.

4. Test out your newly replaced key fob by pressing any of its buttons – it should now be working properly!

How Do I Start My Jeep Compass When My Key Fob Dies?

If your Jeep Compass key fob dies, don’t panic! There are a few simple steps you can take to start your car.

First, make sure that the key fob is actually dead. Try pressing the button a few times to see if it works. If the key fob is completely unresponsive, then it’s probably time to replace the batteries. Once you’ve confirmed that the key fob is dead, you can still start your Jeep Compass by using the physical key that’s stored inside the fob.

Simply insert this key into the ignition and turn it to the “on” position. Your Jeep should start right up! If you don’t have a physical key or if starting your car this way doesn’t work, then you’ll need to call a tow truck or roadside assistance service to get help starting your car.

Jeep Key Fob battery replacement Compass / Renegade / Liberty / Cherokee / Grand Cherokee

Wrapping Up

In conclusion, it is relatively easy to replace the key fob battery in a Jeep Compass. The most important thing is to make sure that you have the correct replacement battery. Once you have the correct battery, simply remove the old one and insert the new one.

Rate this post

Leave a Reply